Back to all

Lean Times (Shocks and Springs)

February 11, 2024

You may have noticed your vehicle going through lean times.  By that, we mean it's literally leaning to one side.  When you notice that, you should get it checked out at your service facility soon because you could have a serious problem.

Many things can cause a vehicle to lean.  You may have problems with your struts, shocks or springs.  They all work in tandem to make your ride more comfortable.  The struts bear the weight of the vehicle's body, the shock absorbers employ a piston that keeps your tires in contact with the road and controls movement of the vehicle's body.  Springs also absorb impacts from uneven road surfaces.

If these components get stuck, either too high or too low, they cause your vehicle to lean.  That's because that side of the vehicle isn't at the height it is designed to be.  A technician will determine where the problem is.  Outside elements such as moisture plus hard knocks to these components can weaken them, eventually resulting in a failure.  The metal can get so fatigued that it breaks.  Often when one side of a vehicle is too high or too low, your service advisor will advise you to have the other side done as well.  That's because if only one side has new parts installed, it won't be level with the side that has old parts. 

There are a couple of other reasons vehicles can lean.  One is that the suspension can be bent or the chassis twisted, again due to wear and tear by driving on rough roads, over badly maintained railroad tracks or in deep potholes. 

Another reason your vehicle may lean is that the tires and/or wheels aren't all the same size.  Or one side might have drastically over or underinflated tires.  This can be a dangerous condition since the imbalance can affect steering and handling.

Considering what drivers put suspension parts, tires and wheels through, it's not surprising that they can be punished so much that they don't hold up like we want them to.  A level-headed driver will make sure to be driving a level vehicle by making sure these components are maintained in good condition.

Tuffy Wyoming
4315 Clyde Park Ave. SW
Wyoming, Michigan 49509
616.534.8643

More articles from Tuffy Wyoming

Smooth Operator (Shock Absorbers)

October 27, 2025

When you are comfortably headed down the road, you may not realize how many of the imperfections in the driving surface are being smoothed out, so you hardly feel most of them. You can thank your shock absorbers for a lot of that comfort, and its important to make sure you keep your shocks in go... More

A "Mounting" Problem (Motor Mounts)

October 23, 2025

You know how heavy your engine and transmission are, so you can imagine how tough the parts that hold them onto your vehicle's sub-frame must be. Not only must they support the weight, they also have to isolate vibrations and noise from the passenger cabin. Pretty tall order, wouldn't you say? ... More

Don?t Meddle with the Pedal (Brake Caliper Replacement)

October 12, 2025

If you drive a newer vehicle, chances are it has disc brakes, and one of the components of that type of brake is called a brake caliper. The caliper allows the pressure from your foot on the brake pedal to eventually move brake pads against discs in your wheels, which then slow and stop your veh... More